Introduction to Electrical Systems & Safety
Introduction to Building Electrical Systems
Roles and Responsibilities of Electrical Technicians
Basic Electrical Principles
Voltage, Current, Resistance & Power
AC and DC Fundamentals
Electrical Units and Measurements
Electrical Hazards and Risks
PPE Requirements
Electrical Safety Procedures
Lockout/Tagout (LOTO)
Safe Isolation Procedures
Introduction to Electrical Drawings and Symbols
Electrical Distribution Systems
Electrical Power Distribution Basics
Main Distribution Boards (MDB)
Sub Main Distribution Boards (SMDB)
Distribution Board Components
Circuit Breakers and Protection Devices
MCB, MCCB, RCCB, ELCB Principles
Cable Types and Cable Identification
Earthing and Grounding Systems
Load Distribution Basics
Panel Inspection Procedures
Electrical Room Safety
Practical Panel Inspection Exercises
Lighting Systems Maintenance
Types of Lighting Systems
LED Lighting Systems
Emergency Lighting Systems
Lighting Control Systems
Lighting Maintenance Procedures
Ballasts, Drivers & Transformers
Switching Devices
Lighting Fault Diagnosis
Lux Level Awareness
Lighting Energy Efficiency
Replacement Procedures
Practical Lighting Exercises
Motors & Electrical Equipment
Introduction to Electric Motors
Single Phase & Three Phase Motors
Motor Components and Operation
Motor Starters and Contactors
Overload Protection
Basic Motor Control Circuits
Pump Motor Systems
Motor Maintenance Procedures
Motor Inspection and Cleaning
Common Motor Faults
Troubleshooting Motors
Practical Motor Exercises
Electrical Testing & Troubleshooting
Introduction to Electrical Testing Equipment
Multimeter Usage
Clamp Meter Usage
Insulation Resistance Testing
Continuity Testing
Voltage and Current Measurements
Troubleshooting Methodologies
Fault Finding Techniques
Short Circuits and Open Circuits
Power Failure Investigation
Emergency Fault Response
Practical Testing Exercises
Generators, UPS & Backup Systems
Generator Fundamentals
Generator Components and Operation
Automatic Transfer Switch (ATS)
UPS Systems Basics
Battery Systems and Maintenance
Backup Power Systems
Generator Inspection Procedures
UPS Alarm Identification
Preventive Maintenance Procedures
Emergency Power Coordination
Troubleshooting Backup Systems
Practical Operational Scenarios
Preventive Maintenance & CMMS Basics
Preventive Maintenance Principles
Planned Preventive Maintenance (PPM)
Maintenance Scheduling
Inspection Checklists
Work Orders and Job Cards
Maintenance Reporting Procedures
Introduction to CMMS Systems
Spare Parts Coordination
Equipment History Tracking
Downtime Reduction Techniques
Maintenance KPI Awareness
Practical Documentation Exercises
Building Electrical Services & BMS Awareness
Building Electrical Utilities
Electrical Coordination with HVAC Systems
Fire Alarm System Awareness
Emergency Shutdown Basics
Basic BMS Concepts
Sensors and Field Devices Awareness
Control Panels Basics
Electrical Interfaces in Buildings
Power Monitoring Systems
Electrical Energy Management
Operational Coordination
Common Facility Electrical Issues
HSE & Operational Best Practices
Electrical Maintenance Safety
Permit-to-Work Awareness
Arc Flash Awareness
Working at Height Awareness
Safe Tool Handling
Risk Assessment Basics
Incident Reporting Procedures
Housekeeping in Electrical Rooms
Environmental Awareness
Emergency Response Procedures
Best Maintenance Practices
Toolbox Talk Procedures
Practical Workshop & Final Assessment
Integrated Maintenance Scenarios
Electrical Fault Simulation
Panel Inspection Workshop
Troubleshooting Exercises
Testing and Measurement Practice
PM/PPM Demonstrations
Team Maintenance Activities
Final Practical Assessment
Review and Feedback Session
Course Summary and Certification
Expected Outcomes
Upon successful completion of this course, participants will be able to:
Perform practical electrical maintenance safely and efficiently.
Troubleshoot common facility electrical system problems.
Conduct preventive maintenance professionally.
Improve reliability of electrical systems and equipment.
Reduce downtime and maintenance response time.
Apply workplace electrical safety requirements.
Improve maintenance reporting and operational coordination.
Support efficient facility management operations.
Bottom of Form
comments (0)