NAFTA | Course List

IADC Wellsharp - Well Control - Supervisory Level

The program consists of a Practical Assessment Exercise and Written Test papers on Equipment and Principles & Procedures for office engineers (Level ...

IADC / IWCF Well Intervention

The IWCF/IADC Well Intervention Pressure Control course is designed for operators and supervisors and provides the knowledge and skills necessary to ...

IWCF Well Control Level 2 (Introduction)

The program consists of a Practical Assessment Exercise and Written Test papers on Equipment and Principles & Procedures for office engineers (Level ...

BUSINESS LAWS AND BUSINESS COMMUNICATION, HRM, BUDGETING AND PLANNING

This course will provide delegates with the skills needed to fully understand the business laws, business management involved with HR that allow them ...

IADC Wellsharp - Well Control - Driller Level

The program consists of a Practical Assessment Exercise and Written Test papers on Equipment and Principles & Procedures for office engineers (Level ...

IADC Wellsharp - Well Control - Introductory Level

The program consists of a Practical Assessment Exercise and Written Test papers on Equipment and Principles & Procedures for office engineers (Level ...

IWCF Well Control Level 3 (Driller)

The program consists of a Practical Assessment Exercise and Written Test papers on Equipment and Principles & Procedures for office engineers (Level ...

IWCF Well Control Level 4 (Supervisor)

The program consists of a Practical Assessment Exercise and Written Test papers on Equipment and Principles & Procedures for office engineers (Level ...

CERTIFIED LOGISTIC MANAGER (CLM)

The logistics and supply chain certification qualification demonstrates to employees advanced skills in logistics and supply. It formalizes ...

LWD & MWD Tool Physics & Application

Logging while drilling is aimed at improving wellbore stability & hole quality, and optimizing well placement and reservoir exposure for maximum ...

Oil and Gas Feasibility Study and Financial Analysis

Securing finance in today’s challenging and volatile markets is difficult. In order to take advantage of the opportunities available within this ...

Basic Petroleum Economics

Could you answer the following three questions for your next project? What will it cost? What is it worth? Will it earn sufficient profit? Before ...

Understanding IAS and IFRS

IFRS requirements are those established by the International Accounting Standards Board (IASB) who have developed, in the public interest a set of, ...

Cost Engineering in the Oil and Gas Industry

The course provides an understanding of the basics of cost engineering including the data requirements for realistic cost estimation. In the ...

Principles of Managerial Finance

Fundamentals of Managerial Finance are an introductory course in managerial finance. This foundation course provides insights to the role of the ...

Upstream Oil and Gas Accounting

A training covering financial management, IFRS, budgeting, and cost analysis in the oil & gas industry. Designed for finance professionals and ...

Petroleum Financial Workshop

Financial decisions are made every day and are an integral part of every company's ultimate success or failure. Personnel decisions, drilling for ...

Auditing in Petroleum Exploration & Production

A training designed to equip auditors with practical skills for auditing E&P operations, including JV, PSC, and internal audits in upstream oil & ...

Fundamentals of International Oil & Gas Law

International petroleum transactions occur within a complex legal environment that limits what petroleum companies, host governments and service ...

Professional Business Leadership for Exploration and Production Companies Workshop

Unlock the power of everyday leadership with tools to drive performance, communication, and strategic impact. Designed for co-managers and senior ...

Negotiation & Contracts in the Petroleum Upstream

A upstream-focused course on contracts and negotiation in the petroleum industry. Learn to manage PSCs, JOAs, rig contracts, and upstream ...

IADC RIGPASS

IADC HSE Rig Pass is designed to provide the new employees with basic orientation of drilling & servicing operations and safe work practices to ...

Applied HSE Management

This course is about practicing and applying HSE management for the oil & gasand petrochemicals industries. A rich variety of exercises, readings, ...

Process Safety Management

This course introduces the concepts of process safety management in the oil and gas industry, the elements and benefits of process safety management ...

Safety in Maintenance and Construction Works

This course designed to o Understand maintenance and construction related risks. o Promote safety practice and to ensure safer work ...

Safety Regulations in the Engineering Workshop

As this course has been designed and delivered to help you and your fellow participants understand the changes that will occur under the WHS ...

Safety in Refinery and Petrochemical Plant Operation

This 5-day course outlines the risks inherent in the products and equipment handled in the operation of refinery and petrochemical plant. It is ...

Development Managers Program

This programme provides the essential skills need for personnel to develop in a management position within the Oil and Gas industry to deliver ...

Human Resources Administrator/Assistant

The Human Resources Administrator/Assistant is an interactive course enabling you to further develop the knowledge and skills required to increase ...

Personnel Supervision in the Petroleum Industry

A supervisor, regardless of technical expertise, can make an error setting off an uncontrolled and disastrous chain reaction unless he/she has ...

Performance Management

Explore the end-to-end processes associated with the performance management cycle – from setting goals and allocating work through to performance ...

Acquisition and Interpretation of Modern Open hole Log

The course presents the principles underlying the measurement of various properties of rock sequences penetrated in boreholes and covers the ...

Advanced Clastic Sequence Stratigraphic Techniques: Applications to Reservoir Studies

The course demonstrates the impact of sedimentological factors on clastic reservoir distribution and character as well as the use of facies models ...

Geochemistry for Petroleum Systems and Source Rock Evaluation

This course is an introduction to petroleum geochemistry concepts and applications for basin-scale evaluations. It begins with a review of source ...

Sequence Stratigraphy: An Applied Workshop

The objective of this course is to help you find more oil and gas using well-logs, core and seismic data. This is a prerequisite course for others ...

Seismic Velocities and Depth Conversion

Velocity is one of the most important parameter that can be derived from the seismic data. Velocity values are indicative for layer identification ...

Principles of 3D Seismic Interpretation and Application

Seismic Acquisition and Processing is part of a sequence of related activities and its design should in the first place reflect the purpose of ...

Practical Technique of Geological Modeling

A detailed description of the practical techniques of building 3D reservoir geological models will be presented and discussed throughout the ...

Foundations of Petrophysics

Petrophysics is a key discipline in petroleum exploration and production. The main objectives of this course are to understand: - The petrophysical ...

Petrophysical Evaluation

The goal is for participants to develop subsurface skills for integrated analysis of rock, pore, and fluids and to solve problems associated with ...

Coring and Core Analysis

Core-based measurements offer the most tangible and direct means of determining critical reservoir parameters. Core analysis can play a vital role in ...

Integration of Rocks, Log and Test Data

This course provides the background necessary to address the more complex reservoir evaluation and productivity challenges within exploration, field ...

Production Logging

Production logging refers to a suite of logs that are normally run on completed injection or production wells to evaluate the performance of the ...

Cased Hole Formation Evaluation

This course teaches skills necessary to practice the art and science in accurately determining remaining hydrocarbons using modern dual-detector and ...

Wireline Formation Testing and Interpretation

This course is designed to satisfy the interdisciplinary needs of geoscientists, petrophysicists, and reservoir engineers with an increasing use of ...

Formation Evaluation

Different methods are expanded to include deterministic and probabilistic evaluations. LWD and MWD concepts are discussed and compared to wireline ...

Phase Behavior and PVT & Applications in Reservoir Simulation

The course covers measurement, prediction and application of reservoir fluid data as required in reservoir studies, production operation, and ...

Naturally Fractured Reservoirs: Geologic and Engineering Analysis

This course covers geologic and engineering concepts, methodology, and technology used to characterize, evaluate, and manage naturally-fractured ...

Integrated Reservoir Analysis

The goal of Integrated Reservoir Analysis is for participants to understand the concepts and develop subsurface skills to integrated analysis of ...

Reservoir Management

The principles of sound reservoir management are presented with emphasis on practical applications. Actual case histories are used to study both ...

Advanced Reservoir Simulation

The course will give an overview of different simulation approaches and their strengths and weaknesses. Some of the major applications of reservoir ...

Fractured Reservoir: Characterization and Modeling

This course presents practical methods to characterize fracture field and build fracture model. These methods have developed over the past ten years ...

Advanced EOR / IOR Technology

It is well known that primary and secondary production schemes in fields containing heavy oil (< 20 °API) generally result in recoverable reserves. ...

Enhanced Oil Recovery with Gas Injection

This course gives a comprehensive understanding of immiscible gas and compositionally enhanced recovery processes and the important variables that ...

Reservoir Simulation using Petrel RE from Preliminary to Advance

This five day course will cover the subjects required to • construct advanced, high resolution static reservoir models • assess uncertainty ...

Gas Reservoir Management

Natural gas production has become a major part of every petroleum company's asset base and continues to grow in importance throughout the world. This ...

Reservoir Characterization: A Multi-Disciplinary Team Approach

The modern team approach to Reservoir Characterization describes productive zones more reliably through the integration of disciplines, technology, ...

Well Test Interpretation in Practice

Objective Training is aimed to provide a basic understanding on the well test process and data interpretation. Main objective is to prepare the ...

Managing Wellsite Operations

Managing Wellsite Operations teaches participants to apply organizational learning processes, wellsite technical limits analysis and more efficient ...

Hydraulic Fracturing Applications

The course takes a practical approach to the applications of hydraulic fracturing. Fracturing technology benefits and limitations in all types of ...

Horizontal, Extended Reach (ERD) and Multilateral Drilling

This course is designed to develop an understanding of the fundamental aspects of Directional Drilling and wellbore surveying as they apply to the ...

Drilling Project and Risk Management

The course covers the application of sound project and risk management principles in the management of drilling operations. It uses a holistic, ...

Well Planning and Drilling Optimization

This is a comprehensive course on drilling with topics covering from the planning stages of a drilling well, to selecting optimum operating ...

Directional, Horizontal, and Multilateral Drilling

This course builds a firm foundation in the principles and practices of directional drilling, calculations, and planning for directional and ...

Casing Design

This course focuses on casing design, both from engineering and an operational perspective. Design concepts are provided for a wide range of ...

Well Stimulation Design and Operations

This practical course is designed for those involved in all aspects of well stimulation. To be better able to make decisions it is important to have ...

Advanced Completion Engineering

This course is aimed at petroleum, production and operation engineers who wish to gain an insight into some of the more advanced aspects of ...

HPHT Operations and Drilling Challenges

This course covers all major aspects of HPHT well construction projects. It covers the theories, technicalities and practicalities of HPHT wells ...

Drilling Fluids

This course takes a comprehensive look at the functions of drilling fluids, and then addresses how to engineer a mud system. Water based, oil based ...

Procurement in Oil & Gas

This course will expand the industry understanding of supply chain professionals and increase their value-added in a global, fast changing ...

Effective Materials Management

This course covers practical considerations essential to achieve major improvements in planning, buying, storing and disposing of the vast array of ...

Reliability Engineering

This course is designed to teach reliability engineering skills as they apply to improving process system reliability and developing maintenance ...

Advanced Strategic People Management

The course will emphasise your strategic thinking and handling of complex people management and business decisions. You will be able to develop the ...

People Management

The course is designed for those who already have some experience in human resources and wish to build a career in people management. During this ...

Foundation of People Practice

The course is a foundation qualification that provides a solid and practical foundation in HR and Learning & Development (L&D) skills including ...

Leadership Development Program

The Leadership Development Program equips managers, team leaders, and emerging leaders with practical skills to lead effectively in their everyday ...

Petroleum Data Management

The course is a short course that focuses on the impact of digitization that has profoundly affected the energy industry including oil and gas ...

Advanced Directional Drilling

The purpose of the course is to enable participants to understand the operational & engineering aspect of directional drilling. The course covers the ...

Gas Processing and Conditioning

This introductory course is designed to provide participants with a complete and up-to-date overview of gas conditioning operations and processing ...

Well Integrity in Well Construction and Operation

To enable participants to understand the well integrity management principles and well Integrity components during the lifecycle of the well and ...

Drilling Problems and Drilling Optimization

Describes occurrences, preventive measures and remedial actions for common downhole drilling problems. Addresses considerations involved in drilling ...

IADC Stuck Pipe Prevention

The Stuck Pipe Prevention workshop provides the most comprehensive coverage in the industry for understanding and preventing the underlying causes of ...

Advanced Drilling Technology

This course presents the current state of development of several unique and unconventional drilling applications being used worldwide in the industry ...

Well Design and Construction

This course gives an overview of the well construction process and an introduction to subsea drilling operations. The goal of the course is to ...

Corrosion Control by Materials Selection and Design

Proper selection of materials and design are most effective in cutting the cost of corrosion and achieving low cost reliability as corrosion can be ...

Centrifugal Pump Design and Application

The objectives of this workshop are to improve the outcomes of negotiations by enhancing your negotiating skills. You will learn to apply a ...

Centrifugal Pumps and Positive Displacement Pumps

To enable the participants to understand performance, technology, and operation of centrifugal and positive displacement pumps. On completion of the ...

Gas Turbine Technology

To bring improved knowledge of gas turbine technology and a better skill to select, to operate and to maintain gas turbines. On completion of the ...

Rotating Machinery

To enable the participants to understand performance, technology and operation of rotating machinery. On completion of the course, the participants ...

Operation, Maintenance and Inspection of Rotating Machinery

One of the most common causes of damaging vibration in rotating equipment is shaft misalignment. This comprehensive course trains the student in the ...

Piping Systems - Mechanical Design and Specification

This course for engineers and piping system designers reviews the key areas associated with the design of piping systems for oil and gas facilities. ...

Detail Engineering of Piping Systems

This course will provide attendees the background required to design, engineer and complete piping assignments. This course will be of interest to ...

Pipeline Hydraulics and Multiphase Flow

To provide knowledge of the phenomena relative to pipeline hydraulics, as well as main methods for friction loss calculation and flow ...

Introduction to Gas Turbines and Centrifugal Compressors

This course explores the construction and configuration of the centrifugal compressor in some detail. This course is an add on to Control & Operation ...

Mechanical Aspects of Centrifugal Gas Compressors

This course explores the construction and configuration of the centrifugal compressor in some detail. This course is an add on to Control & Operation ...

Practical Approach to Machinery Vibration Signature Analysis

To provide the tools allowing to identify and evaluate most of the machinery defects during operation. To give the necessary knowledge and methods ...

Design of Heat Exchangers, Reboilers, Condensers and Air Coolers

To provide an introduction to thermal and mechanical design methods for shell and tube heat exchangers, reboilers, condensers and air ...

Maintenance for Static and Rotating Equipment

This course will provide a comprehensive understanding of the various types of static and rotating equipment including pressure vessels, heat ...

Meters Calibration and proving systems Calibration Certification

This course is to apply an in-depth knowledge to the topics of liquid and gas flow metering and custody measurement as well as to the fluid mechanics ...

Certified Management Accountant (CMA)

This course helps you prepare for the Certified Management Accountant (CMA) exam. It contains informative lessons that address all the accounting ...

IBM Z: Technical Overview of HW and SW Mainframe Evolution

This course is designed to provide an understanding of today's complex system mainframe environment on the zEnterprise System and System z servers. ...

New Functions and Features in Db2 for z/OS (v11)

Learn about the new features and enhancements of DB2 11 for z/OS, including the technical detail of the functional enhancements of this significant ...

CIPD Level 3 PEOPLE PRACTICE (Preparation)

The Certificate in People Practice is a foundation programme designed to reflect the CIPD Profession Map and the professional membership ...

Advanced Oil & Gas Project Economics, Risk & Decision Analysis

The petroleum industry is extremely vast and critical to the success of a nation, and thus, organisations in this industry need to ensure that their ...

IBM Spectrum Protect version 8.1.12 Implementation and Administration

IBM Spectrum Protect 8.1.12 is a data backup and recovery solution designed to help you manage your data retention, reduce the cost of storage, and ...

IBM z/OS 2.4 Update (ESC9G)

This course is designed to teach students the new features and enhanced functions provided in z/OS Version 2 Release 4. The software updates and ...

Project Control - Oracle Primavera P6

This course is designed to provide candidates with a comprehensive understanding of Primavera P6 Professional. The course will cover the basics of ...

IADC Rig Inspection Workshop

The course starts with a detailed description and specification of main rig systems and equipment used for drilling and work over operations and ...

IBM Maximo Manage Deployment Professional

Maximo training will strengthen candidate’s skills and proficiency in IBM Maximo Asset Management. candidates will master the fundamental concepts ...

Project Management (PMI Preparation training)

The course prepares participants for taking the PMP® exam. It is much more effective than any PMP exam simulator – you get practical experience, ...

PMI Scheduling Professional Exam Preparation

This course is highly interactive aiming to share knowledge and experience that will bolster the scheduling knowledge and in turn, boost ...

Certified Cost Professional (CCP)

For over thirty years, certifications offered by the Association for Advancement of Cost Engineering (AACE) have been a mark of distinction, and more ...

NDT Level 2 Inspectors (UT - Ultrasonic Testing)

This NDT method sends pulses of high-frequency sound into the material that needs to be examined. Reflections of this sound indicate material ...

NDT Level 2 Inspectors (RT - Radiographic Testing)

This Radiography testing training Level 2 course cover intensively on Film Radiography and x ray film interpretation. RT Level 2 training course ...

NDT Level 2 Inspectors (MPT - Magnetic Particle Testing)

This course is designed by experienced ASNT Level III, as per ASNT SNT TC 1A. MPI testing also called as ‘magnaflux’ testing among the quality ...

AUTOGAS (LPG) FILLING STATION DESIGN, OPERATION AND MAINTENANCE

LPG, Auto Gas Station, ESD System, AUTOGAS (LPG) FILLING STATION DESIGN, OPERATION AND MAINTENANCE, Dubai, Iraq, Qatar, Kuwait, Abu Dhabi, Basra, ...

Certified QA/QC Engineer

Master QA/QC principles and global standards in this training for engineers in construction, oil & gas, and manufacturing. Gain practical skills in ...

Upstream Oil & Gas Business Simulation

This business simulation course offers a hands-on experience in upstream oil & gas decision-making, covering exploration, development, and production ...

Petroleum Inspection Techniques and Best Practices

A practical course in petroleum inspection covering custody transfer, tank gauging, sampling, testing, loss control, and international standards ...

HAZOP Hazard and Operability Study

Comprehensive HAZOP training covering hazard identification, operability assessment, and process safety for oil, gas, and chemical ...

Fire & Gas Detection System

Comprehensive Fire & Gas Detection System training covering design, operation, maintenance, and safety compliance for oil, gas, and industrial ...

NACE Cathodic Protection Tester – CP1 Preparation Course

Comprehensive training for CP1 certification, covering cathodic protection principles, testing techniques, and NACE exam preparation for oil, gas, ...

NACE Cathodic Protection Technician – CP2 Preparation Course

Advanced CP2 training for experienced professionals, focusing on cathodic protection design, data interpretation, troubleshooting, and preparation ...

NACE Cathodic Protection Technologist – CP3 Preparation Course

Expert-level CP3 training on advanced cathodic protection design, project management, compliance, and preparation for the NACE CP3 certification ...

Drilling Optimization using Data Management & AI

This course provides practical insights into optimizing drilling operations by applying advanced data management and artificial intelligence ...

Fundamental of Inspection and Monitoring of Corrosion Control by Cathodic Protection training

This course introduces the fundamentals of corrosion control through cathodic protection, focusing on inspection, monitoring, and evaluation ...

Advanced PowerMax and VMAX Family Configuration

Gain in-depth expertise in DELL EMC VMAX Family storage systems. This hands-on training covers architecture, configuration, performance management, ...

Carbon Capture, Utilisation & Storage (CCUS) Operations & Management

Gain practical knowledge on CCUS technologies, operations, and management strategies, covering CO₂ capture, transportation, utilisation, and storage ...

Sustainability Reporting & ESG for Oil & Gas Executives

Master ESG and sustainability reporting standards for oil & gas, focusing on strategy, disclosure frameworks, stakeholder communication, and ...

Certified Maintenance and Reliability Professional (CMRP)

Preparation program for the CMRP credential, focused on practical tools and the full maintenance and reliability body of ...

Asset Reliability Practitioner ARP A

Foundation course in asset reliability and condition‑based maintenance with practical tools and ...

Maintenance Planning, Scheduling, and Control

Practical framework for planning, scheduling, and controlling maintenance to improve wrench time and asset ...

Certified Maintenance Planner

Professional competencies and tools for the maintenance planner role, focused on job planning and field ...

Advanced Maintenance Management

Advanced practices to transform maintenance into a strategic value creator with integrated PM, PdM, and performance ...

Managing Efficient Shutdowns & Turnarounds

Structured approach for safe, on‑time, and on‑budget shutdowns and turnarounds from scope to ...

Reliability Centered Maintenance (RCM)

Practical capability to apply RCM and derive optimized maintenance strategies for critical ...

Root Cause Analysis (RCA)

Structured methodology to find true root causes and implement corrective and preventive ...

Computerized Maintenance Management System (CMMS)

Blueprint to configure and use CMMS for planning, execution, data quality, and performance ...

Preventive & Predictive Maintenance

Design and optimization of PM and PdM programs aligned to failure behavior and ...

Resilience & Crisis Management in Energy Assets

Develop resilience and crisis management capabilities for energy operations, focusing on preparedness, emergency response, asset protection, and ...

NACE Cathodic Protection Specialist – CP4 Preparation Course

Advanced specialization program in cathodic protection design, assessment, troubleshooting, and compliance for complex onshore and offshore ...

Certified Asset Management Assessor (CAMA)

Professional certification program that equips participants with the knowledge and competencies required to assess organizational asset management ...

Asset Life Cycle Management

Comprehensive course on managing assets from concept to decommissioning, focusing on cost, performance, risk, and sustainability across the full life ...

IOSH Managing Safely

IOSH Managing Safely is a practical safety course that equips managers with essential skills to identify hazards, assess risks, and improve workplace ...

Certified Human Resource Professional (CHRP) Preparation

Certified Human Resource Professional (CHRP) training equips HR professionals with practical skills in recruitment, employee relations, performance ...

Preparation for Basic Coatings Inspector Certification (CIP Level 1)

This course provides a comprehensive preparation for professionals seeking to obtain the Basic Coatings Inspector Certification (CIP Level 1), ...

Slickline Operations and Maintenance

The program focuses on safe execution of slickline jobs, correct handling of tools and equipment, operational discipline, and awareness of pressure ...

Report Writing

Effective report writing is a critical skill in the professional world, as well-written reports influence decisions, communicate technical and ...

Certified HDPE Pipe Welder

A practical, hands-on training program designed to certify personnel in safe and compliant HDPE pipe welding using butt fusion and electrofusion ...

Building Management System (BMS) – Complete Fundamentals

This course introduces the fundamentals of Building Management Systems (BMS), covering system architecture, sensors, controllers, communication ...

Advanced Well Cementing Practices

An advanced practical course covering cement chemistry, slurry design, placement, primary and remedial cementing, job execution, cement evaluation, ...

Advanced Integrated Production Modeling

Integrated Production Modelling is the tool that facilitates the integration of people and tools resulting in efficient field management. Engineers ...

Advanced Managed Pressure Drilling

Course objectives: This course is presents the participants Managed Pressure Drilling techniques, design and equipment. The course starts with an ...

Advanced Scaffolder Certification – TG20 / SG4

The Advanced Scaffolder (TG20 / SG4) course is a professional training program designed for experienced scaffolders who require the knowledge and ...

API 510 – Pressure Vessel Inspector Certification Preparation

The API 510 Pressure Vessel Inspector course is designed to prepare inspection and maintenance professionals to understand, interpret, and apply the ...

API 571 – Damage Mechanisms Affecting Equipment in the Refining Industry

The API 571 Damage Mechanisms course provides participants with a deep understanding of the various types of degradation that affect materials and ...

API 579 – Fitness-for-Service (FFS)

The API 579 Fitness-for-Service course provides participants with the essential knowledge and skills to evaluate the structural integrity of ...

API 653 (Tank Inspector) Certification

This course provides an in-depth understanding of API 653 standards for inspection, repair, alteration, and reconstruction of aboveground storage ...

Authorized Gas Tester (AGT)

A practical course on atmospheric gas testing for confined spaces, hot work, and hazardous operations, covering oxygen, flammable and toxic gases, ...

Basic Electricity for Non-Electricians

The training program is designed to provide non-electrical personnel with a clear and practical understanding of fundamental electrical principles, ...

Basic Scaffolder Certification

The Basic Scaffolder course provides essential knowledge and practical skills for personnel involved in erecting, modifying, inspecting, and ...

Basics of CCS/CCUS

A practical introduction to the complete CCS and CCUS value chain, covering CO₂ capture, transportation, geological storage, CO₂ EOR, site ...

Basics of Core Analysis for Petroleum and CCS

A practical course covering RCA and SCAL, sample selection, porosity, permeability, wettability, electrical properties, capillary pressure, ...

Boilers & Balance of Plant (BOP) Maintenance

The Boilers & Balance of Plant (BOP) Maintenance training program is a comprehensive technical course designed to provide engineers, supervisors, ...

Budget Management

The Budget Management course is designed to equip managers and professionals with the essential knowledge and practical skills required to plan, ...

CCT – Certified Calibration Technician Training

The Certified Calibration Technician (CCT) course provides comprehensive training on calibration principles, procedures, and best practices for ...

CEIM (Continuous Emission Monitoring) Analyzer Calibration

his HRSG Maintenance Refresher and Troubleshooting training is designed to enhance and refresh the technical knowledge and practical skills of ...

Chemicals and Hazardous Waste Management (Oil & Gas)

Some of the leading causes of environmental pollution include improper storage of hazardous chemicals (both goods and wastes), an incompatible ...

Preparation for CIPD Level 5 Associate Diploma In Organisational Learning & Development

The CIPD Level 5 Associate Diploma in Organisational Learning & Development (L&D) is a globally recognised professional HR qualification focused on ...

Preparation for CIPS Level 2 Foundation Certificate

The CIPS Level 2 Foundation Certificate is an internationally recognised entry-level qualification designed for individuals working or aspiring to ...

Preparation for CIPS Level 3 Advanced Certificate

The CIPS Level 3 Advanced Certificate is a globally recognised qualification aimed at individuals working in procurement and supply chain roles who ...

Preparation for CIPS Level 4 Foundation Diploma

The CIPS Level 4 Foundation Diploma is an internationally recognised qualification for procurement and supply professionals transitioning into ...

Computational Fluid Dynamics (CFD) Analysis

Computational Fluid Dynamics (CFD) has become an essential engineering tool for analyzing and predicting fluid flow behavior, heat transfer, ...

Control of Substances Hazardous to Health (COSHH)

The COSHH Certification course provides comprehensive knowledge on identifying, assessing, and controlling hazardous substances in the workplace. It ...

Crisis Management & Emergency Response Planning

About the Course: The Oil and Gas industry is recognized as one of the most hazardous ccupational sectors in the world. The safety of infrastructure, ...

Drill String Design and Optimization

Course objectives: The drillstring is often considered to be one of the most simple pieces of equipment in use on a drilling rig. Ninety-nine percent ...

Drillbench Blowout Control

About the Course: This course introduces the principles and concepts related to blowout control operations and the use of the Drillbench Blowout ...

Drillbench Dynamic Hydraulics And Dynamic Well Control

About the Course: This course gives an introduction to the capabilities of the Drillbench Dynamic Hydraulics and the Drillbench Dynamic Well Control ...

Drillbench Dynamic Hydraulics And Temperature Modeling

About the Course: This course teaches the fundamentals of using the Drillbench Dynamic Hydraulics software. It shows the user how to enter the ...

Drillbench Dynamic Well Control Modeling

About the Course: This course teaches the fundamentals of using the Drillbench Dynamic Well Control software. It shows the users how to enter the ...

Electrical Maintenance & Troubleshooting for Facility Management Technicians

The Electrical Maintenance & Troubleshooting for Facility Management Technicians program is a comprehensive technical training course designed ...

Finance for non-Finance Professionals

The Finance for Non-Finance Professionals training program is designed to equip managers, engineers, supervisors, and professionals from ...

Financial Auditing for Internal Auditors

This training program provides a comprehensive overview of financial review processes and internal auditing techniques. Through it, participants will ...

First Aid Level 1

First Aid Level 1 is an introductory health and safety course designed to equip participants with essential lifesaving skills required in workplace ...

Flowserve Centrifugal Pump fundamentals

This course will introduce delegates to the different types of pumps, motors and drives and their associated terminology. Centrifugal and ...

Flowserve Mechanical seal fundamentals

This course aims at providing the participants with a comprehensive theoretical and practical knowledge, and enhancing their skills for the ...

Gas Turbine Generator H2 Analyzer Calibration

The Gas Turbine Generator (GTG) H2 Analyzer Calibration training course is a specialized technical program designed for maintenance and ...

Gas Turbine Natural Gas Analyzer Calibration

This Steam Turbine (ST) Unit Maintenance Refresher and Troubleshooting training is designed to reinforce and update the technical knowledge of ...

Geological Modeling: Fundamentals and Property Modeling

A practical introduction to static geological modeling, covering structural frameworks, upscaling, geostatistics, facies simulation, rock typing, ...

HABC Level 2 International Award in Work at Height

The HABC Level 2 International Award in Work at Height is a globally recognized health and safety training program designed to provide workers and ...

Highfield Level 2 International Award in Fire Safety

The Highfield Level 2 International Award in Fire Safety is an internationally recognized training program designed to provide employees with ...

Highfield Level 2 International Award in Risk Assessment

The Highfield Level 2 International Award in Risk Assessment is an internationally recognized qualification designed to provide learners with the ...

Highfield Level 3 International Award in Emergency First Aid at Work

The Highfield Level 3 International Award in Emergency First Aid at Work (EFAW) is an internationally recognized qualification designed to provide ...

HRSG Maintenance Training Refreshment and Troubleshooting

his HRSG Maintenance Refresher and Troubleshooting training is designed to enhance and refresh the technical knowledge and practical skills of ...

HVAC Technician for Facility Management

This HVAC Technician training course is designed specifically for Facility Management environments where reliable operation, maintenance, and ...

Hydrostatic Testing Procedures

This course covers hydrostatic testing principles, planning, and execution for pipelines, pressure vessels, and tanks, ensuring compliance with ASME, ...

Implementing and Operating Cisco Data Center Core Technologies

The Implementing and Operating Cisco Data Center Core Technologies course teaches you to implement data center local area networks (LANs) and storage ...

Implementing Cisco Service Provider Advanced Routing Solutions

The Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) course covers the theories and practices required to integrate advanced ...

Incident investigation and Reporting

The Incident Investigation and Reporting training program is designed to provide participants with the knowledge and practical skills required to ...

Integrated Management System (ISO 9001, 45001, 14001)

The Integrated Management System (IMS) Lead Auditor Certification is a professional program designed to train participants in auditing multiple ...

Interviewing Skills for Hiring Managers

Every organization needs the best of the workforce that enables rapid growth and successful position in the market. The success of any organization ...

Introduction To Marine Pollution And Oil Spill Combating Procedures

About the Course: The refining and transfer of oil cargoes are processes that entail many risks. One of these potential risks is potential oil spills ...

ISO 22301 Lead Auditor

ISO 22301 Lead Auditor Training Course enhances the knowledge and skills to perform a full audit of the Business Continuity Management System (BCMS). ...

ISO 30401:2018 Knowledge Management System (KMS)

This course provides a structured understanding of ISO 30401 Knowledge Management Systems (KMS) requirements and their application in capturing, ...

ISO 45001 Lead Auditor

Occupational health and safety are critical components of any organisation’s operational success. The ISO 45001:2018 Lead Auditor Training Course ...

ISO 9001 Lead Auditor Training

The ISO 9001:2015 Lead Auditor Training course is a comprehensive professional program designed to develop the competence required to plan, conduct, ...

ISO Internal Auditor

The ISO 9001:2026 QMS (Quality Management System) Internal Auditor Course is designed to provide learners with the knowledge and practical skills to ...

ISO/Iec 17025:2017

ISO 17025, the international standard for the competence of testing and calibration laboratories, is of paramount importance for various reasons, ...

Jacking and Rig Move

The course designed to give an understanding of the theory of safe rig move and jacking operations for jack up’s and practice it with hands on in the ...

LEEA Foundation Certificate

The LEEA Foundation Course is an introductory program designed for personnel working in the lifting industry, providing the essential knowledge and ...

Lost Circulation Management & Solid Controls

Lost circulation and ineffective solids control are among the most significant challenges affecting drilling performance, well integrity, and ...

Low Salinity Waterflooding (LSW) Management

About the Course: Low Salinity Waterflood has attracted a real attention and been recognized as an effective Enhanced Oil Recovery (EOR) process ...

Mechanical Maintenance & Troubleshooting for Facility Management Technicians

The Practical Mechanical Maintenance & Troubleshooting for Facility Management Technicians program is a comprehensive technical training course ...

Microsoft 365 Certified: Modern Desktop Administrator Associate

The Microsoft 365 Certified: Modern Desktop Administrator Associate certification is a professional IT credential designed for IT administrators who ...

Mud Engineering

The Advanced IADC Mud Engineering Course is a specialized technical training program designed for professionals working with drilling fluids in the ...

Natural Gas Chromatograph Calibration

The Substation Control System Advanced Training is designed to provide experienced engineers and technicians with in-depth knowledge and practical ...

Natural Gas Flow Meter (Tariff Meter) Calibration

The Substation Control System Advanced Training is designed to provide experienced engineers and technicians with in-depth knowledge and practical ...

Natural Gas Sulfur Analyzer Calibration

The Substation Control System Advanced Training is designed to provide experienced engineers and technicians with in-depth knowledge and practical ...

NORM Training and Certification

NORM (Naturally Occurring Radioactive Material) Training and Certification provides essential knowledge on identifying, handling, storing, and ...

Occupational Health and Safety Diploma (NASP)

The International Association of Safety Professionals is a non-profit membership organisation providing training, consultative services, and ...

Oil & Gas Pipeline Stability Analysis

Oil and gas pipelines operate under diverse and often harsh environmental conditions, requiring robust design and operational practices to ensure ...

Oil & Hazardous Materials Spill Response & Remediation (Oil & Gas)

This oil spills, pollution, prevention, response, and recovery course discusses the complex nature of petroleum hydrocarbon exploration and ...

Oil Spill Combating First Responder

About the Course: This course has been designed according to the approved IMO OPRC model to provide participants with information needed to make a ...

Operation and Maintenance Systems and Control for Energy Systems

The Operation and Maintenance Systems and Control for Energy Systems training program is an advanced professional development course designed to ...

OSHA 30 Hours – General Industry

The OSHA 30 Hours General Industry Certification is an advanced occupational safety program developed to provide comprehensive knowledge of workplace ...

PMI Construction Professional (PMI-CP)

This course is designed to provide candidates with all the knowledge and skills needed to confidently pass the PMI-CP exam, with engaging lectures ...

PMI Risk Management Professional (PMI-RMP)

PMI Risk Management Professional (PMI-RMP) course is designed for project managers who want to proactively reduce the probability of project failure. ...

Power plant performance, efficiency and optimization

This intensive 5-day program provides participants with a deep understanding of modern power plant operations and optimization strategies. It covers ...

Risk Based Internal Auditing

While many Internal Audit functions claim to have adopted a risk-based approach, few have fully integrated this process to add measurable value. By ...

Safe Lifting Operations and Cabinet Crane

The Safe Lifting Operations and Cabin Crane Training program is designed to provide participants with the theoretical knowledge and practical ...

Safety Leadership And Mentoring

About the Course: This training course has been specifically designed to equip echnical, Supervisory, Management and HSE professionals in the Oil and ...

Scaffolding inspector

The STI Scaffolding Inspector Training is a comprehensive program designed to equip participants with the knowledge and practical skills required to ...

SCBA Safety Certification

The SCBA (Self-Contained Breathing Apparatus) Safety Certification course is designed to provide participants with the knowledge and hands-on skills ...

SDN - NFV for Telecom Core Network

The telecommunications industry is rapidly transforming from traditional hardware-centric network architectures toward highly flexible, ...

Soft Services Operations & Supervision

The Soft Services Operations & Supervision Program is an intensive operational training course designed specifically for field personnel, ...

ST Unit Maintenance and Troubleshooting Refreshment Training

This Steam Turbine (ST) Unit Maintenance Refresher and Troubleshooting training is designed to reinforce and update the technical knowledge of ...

STCW Basic Safety Training

The STCW Basic Safety Training is a mandatory international certification for all seafarers. This course equips participants with essential knowledge ...

Steel Structure design, Analysis and Modeling Using Tekla structures.

The Steel Structure Design, Analysis, and Modeling Using Tekla Structures course is an advanced engineering training program designed to equip ...

Substation Control System (Advance Training)

The Substation Control System Advanced Training is designed to provide experienced engineers and technicians with in-depth knowledge and practical ...

Total Productive Maintenance (TPM)

Maintenance has traditionally been viewed as a separate entity outside of the manufacturing process. As companies began to identify the role of ...

Training of Trainers (ToT) Certification

The Training of Trainers (ToT) Certification is a professional development program designed to equip participants with the skills, knowledge, and ...

Transformer, Generator, Breaker Maintenance

Maximum efficiency, reliability and longevity of electrical equipment such as the various types of motors, variable-speed drives, transformers, ...

Workforce Planning and Budgeting

This comprehensive course is designed to equip HR professionals with the knowledge and practical skills required to effectively plan, budget, and ...

WTP Refreshment Training for Maintenance, Troubleshooting and Operation

This training program is designed to provide participants with comprehensive knowledge and practical skills required for the effective operation, ...

LEEA Accredited Appointed Person for Lifting Operations

A practical, competency-based training program designed to develop the knowledge and skills required to prepare, assess and manage safe lifting plans ...

Login

Nigeria